White Out Contacts: Pick the Right Case and Care Kit

Quick answer

Choose a compact, sealable lens case with clearly marked left and right compartments, then pair it with a fresh multi-purpose solution and a simple weekly cleaning habit. For White Out lenses, a dedicated case like the CL Lens Case (Purple-Clear) keeps the pair together and reduces mix-ups.

Step-by-step: choose, clean, and store your White Out lenses

1. Pick a case with marked sides: Choose a case with a clear left and right label and screw-top lids that seal fully. If you use the CL Lens Case (Purple-Clear), assign one side to each lens and keep that habit. Check that both lids close without wobbling before you trust the case with a lens.
2. Clean the case before first use and weekly: Rinse the case with fresh multi-purpose solution, rub the inside gently with a clean finger, then let both compartments and lids air-dry face down on a clean tissue. Do not rinse with tap water. Replace the case at least every three months, or sooner if you see cracks or residue that will not rinse away.
3. Wash and dry your hands before handling: Wash with soap and water, rinse thoroughly, and dry with a lint-free towel. Soap residue and lint can transfer to an opaque white lens and show up as a film. Avoid lotions or oily soaps right before handling, because they leave a residue that is hard to remove from the lens surface.
4. Fill the case with fresh solution, not old: After removing the lenses, empty the old solution, rinse each compartment with fresh solution, then refill with enough solution to cover the lens. Never top off the old solution. Discard the solution in the case each time you store the lenses; reuse weakens the cleaning step.
5. Store lenses fully submerged and closed: Place each lens in its marked compartment, confirm it is under the solution, and close the lid firmly. Keep the case upright and away from heat or direct sun. A lens that floats above the solution can dry at the edge, so check the level before closing.
6. Clean the lenses when you remove them from the case: Take one lens out, rinse it with fresh solution, rub it gently for a few seconds, and rinse again before wearing. Repeat for the second lens so the solutions do not mix. If the lens still feels filmy after cleaning, do not wear it; set it aside and check with your eye care professional.

Product facts

• White Out: White Out is a bold, opaque white cosmetic lens with a no-limbal-ring design and a 14.5mm diameter, available in plano power. The seamless white effect makes smudges or residue more noticeable, so clean storage and handling matter for the look as well as comfort.

  

• CL Lens Case (Purple-Clear): The CL Lens Case (Purple-Clear) is a compact, portable case designed to store lenses securely when not in use. A dedicated case keeps the White Out pair together and protected between wears, which is simpler than improvising with a cup or bag.